Mega 2560 R3 Micro USB (CH340G)
Mega 2560 R3 CH340G/ATmega2560-16AU, MicroUSB
Mega 2560 CH340G/ATmega2560 - compatible with Arduino Mega 2560 board. Built on the Atmel ATmega2560 microcontroller and USB-UART interface chip CH340G.
Board for functionality similar to the Arduino Mega 2560. It is a budget, but the same stable, and uses the original chips ATmega2560 (16 MHz).
The board used the chip CH340G as converter UART-USB. Chip CH340G - is a budget solution. When you work in the frequency 12Mhz, giving a stable result of data exchange (need install drivers to computer).
Mega 2560 CH340G / ATmega2560 - connects to the computer via microUSB cable (used for almost all Android smartphones).
You can supply power to board through a MicroUSB connector or XH power socket (cable with XH connector included). The voltage regulator (LDO) can deal with incoming voltage from 6V to 12V DC. Output current for 5V - about 800mA, for 3.3V - about 350mA (Please note that the higher the input voltage the lower the outgoing current). That will provide a reliable power most of your initial projects.
- Form-factor - Arduino Mega 2560 Rev3,
- microcontroller - ATmega 2560 (16Mhz),
- USB-UART interface - CH340G,
- Input voltage - 6-12V,
- PC connection socket - MicroSUB,
- power socket- XH2,
- XH - cable,
- 70 digital I/O,
- 16 analog inputs,
- 14 PWM,
- 4 bus of UART.
- Operating Voltage:
- DC Current for 3.3V Pin:
- USB cable:
- Not in a complete set
You might also like