4S 30A 14.8V Li-ion Lithium 18650 Battery BMS Packs
The control module with charging and protection of batteries
- Over charge detection voltage: 4.28+ 0.05 V
- Over charging voltage: 4.095-4.195V
- Over discharge voltage: 2.55±0.08
- Over charge detection delay time 0.1s
- Temperature range -30-80
- Short circuit detection delay time: 100ms
- Over current detection delay time: 500 ms
- Balanced current: 60mA
- Working current: 30A
- Over current: 60A
- Short circuit protection function: there is, disconnect the load can be self recovery.
Over charge protection, over discharge protection function, short circuit protection
function, over current protection function, balance.
- Charging port of the plate and the discharge port is the same, both positive and B- connecting battery"-", P- charging port and port on the negative electrode;
- B-, N-, P- pads are all over the hole, the hole diameter of the pad is 3.5mm;
- The battery charging detection interface with DC output in the form of needle. Do the same mouth when the N- is not wiring.