Jūsu grozs
Jūsu grozā vairs nav preču
Product Features:
- Comes with 3.3V voltage, with power indicator Power input with anti-reverse protection, and can not provide more than 150mA of current.
- To achieve direct serial 5V and 3.3V level communication.
- The maximum stable communication baud rate 28800bps.
- Can achieve UART, IIC, 1-wire, SPI and other bus signals 3V-5V level of the two-way conversion.
- dimension - 16x16mm
Compatibility:
- AVCC 5V system power supply
- ASCL 5V system SCL
- ASDA connected 5V system SDA
- AGND then 5V system GND
- BVCC then 3V system power supply
- BSCL then 3V system SCL
- BSDA connected 3V system SDA
- BGND then 3V system GND
Note:
- If the high-pressure area and the low-voltage area of the power has been a total of this module G only need to take a ground.
- the conversion module is equivalent to a straight line, each port is one to one correspondence, but the voltage side 2 is not the same,
- Thus realizing the communication between the different levels.
- the module can not be used as a regulator or transformer function can only be used for IO port
- Level between the small current communication.
- this module pin-pin no welding, but there are matching.
10 vienības:
Nav atsauksmju
16 citi produkti tajā pašā kategorijā:
Nav noliktavā
DAC, Pārveidotāji loģika, Pagarinātāji I2C
I2C ADS1115 16 Bit ADC 4 channel Module with Programmable Gain Amplifier 2.0V to 5.5V
0
Nav noliktavā
Nav noliktavā
DAC, Pārveidotāji loģika, Pagarinātāji I2C
TCA9548A 1-to-8 I2C 8 -way multi-channel expansion board IIC module
0
Nav noliktavā
DAC, Pārveidotāji loģika, Pagarinātāji I2C
Logic Level Converter - High speed Bi-Directional 3.3V-5V, 4 Chanels
3
Nav noliktavā
Tap to zoom
