Description:
- Type: DC/DC Constant Current / Constant Voltage
- Size: (L*W*H)4.80*2.40*1.4cm/1.89"*0.94"*0.55"
- Input Voltage: 5V-57V input voltage must be higher 2V than the output voltage
- Output Current: rated current 2.5A/ 3A MAX ( Heat-sink Needed)
- Output Voltage: 1.25-30V (Adjustable)
- Output Power: 15w max at maximum voltage
- Output short circuit protection: Yes, constant current (constant current setting values)
- Input reverse polarity protection: Yes,
- Constant current range: 0.2-3A (adjustable, default transferred 1A)
- Turn lamp current: constant current value * (0.1), turn the lamp current constant current value Linkage
Benefits:
- Stepless adjustment of the output voltage
- Stepless adjustment of the output current
- LED indicator, Red under load / Green on load free
- Multiturn potentiometer with long life
- Up to 1.5V (Typ. 1.16V) difference between the input and output voltages
- Up to 2.5A output current
- Very low power consumption at idle, about 10mA (0.01)
- Temperature protection
- Input voltage to 60V
- High stability of the output voltage
- High efficiency
- No need additional cooling to 2.2A
- High frequency DC/DC conversion, leading to size reduction of the device
Application:
- Charger for all batteries in the range 1.23V ~ 28V, only set the precise battery voltage and charging current
- High conversion when used in car
- Adjustable laboratory voltage source
- LED driver with constant current
- Dimming devices
- Laboratory power supply
Note:
Size for manual measurement, there may be a 0 to 2 cm error, belongs to the normal phenomenon.
And due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!
