0.96" 128X64 OLED LCD Display (I2C)
0.96" I2C SPI Serial 128X64 OLED LCD Display Module For Arduino
Characteristic
- High resolution: 128X64 (same as 12864LCD resolution, but the unit area of the OLED screen is more pixels)
- Ultra wide viewing angle: greater than 160 °
- Ultra low power consumption: normal display 0.06W (far below the TFT display)
- Wide power supply range: DC 3V-5V (without any changes, directly compatible with commonly used 3.3V and 5V power supply system)
- industrial grade: operating temperature range of -30 ~70 degree
- ultra small size: (L) 27.8MM* (W) 27.3MM* (4.3MM thick)
- support multiple modes of operation: IIC
- compatible with 3.3V and 5V control chip I/O level (without any setup, directly compatible)
- Drive chip: SSD1306
Pin description
- GND: power ground
- VCC: 3.3V or 5V power supply
- SCL: IIC clock line
- SDA: IIC data line
Note
- IIC communication mode, occupy pins minimum, with ACK response, address selection, the most complete function, easy to use
- Microcontroller:
- SSD1306
- Operating Voltage:
- 3.3V/5V
- Resolution:
- 128x64px
- Size:
- 29.28x27.1mm
- Communication modes:
- I2C
- Touch screen:
- NO